Getting Started; Connecting The System; Switching On - Cisco EX60 User Manual

Getting Started

The Cisco EX60 and EX90 are high definition desktop video conferencing
systems. They consist of an LCD screen with build in camera and a touch
screen input panel.
On some systems, the touch panel will have a handset attached. This works like
a telephone handset. Picking up the handset starts the dialling process and
uses the handset for audio. Replacing the handset on the cradle hangs up the
call.
3

Connecting the System

If the unit is not already
connected, simply connect the
power cord to a socket and
connect the data cable to the
appropriate data point.
In general, system used for
video conferencing need to be
plugged into specially
configured data points. If you
need to connect the system in
an area not previously set-up
please contact a member of
your support team.

Switching On

The unit should come on automatically when the power is applied. The unit can
be shut down and re-started by pressing the power button located at the bottom,
left hand corner of the unit.
Power Button
Data
Connection
4