Advertisement
Installation sheet
Getting started
The 1700 MXP turns on automatically when you power up the system. Use the
remote control to navigate in the menu.
Installation wizard
The Installation Wizard starts automatically when the video system is installed at
the first time and guides you through the basic configuration of the system in the
following steps:
•
Welcome page
•
Select Language
•
Enter System Name
•
Enter Software Option Keys
•
Enter IP Settings
Obtain IP Address Automatically
•
•
Static IP Address (address, subnet, gateway)
•
Enter SIP Settings
•
Enter External Management settings
•
On: Enter information for your TMS server (address, path)
•
Off: Select from the list:
•
Gatekeeper and enter the gatekeeper settings
•
Call Manager and enter the call manager settings
•
Direct
•
Finish the wizard. The system will automatically restart the system.
The Installation Wizard can be run any time from the Control Panel menu.
User documentation
See the user documentation for more information:
and
http://www.cisco.com/go/telepresence/docs
78-19991-01 1700 MXP Installation Sheet, March 2011
http://www.tandberg.com/docs
© 2011 Cisco Systems, Inc. All rights reserved.
1700 MXP
Advertisement
