In-Room Controls - Cisco MX200G2 Manual

Event for panel update
Table of contents
The video system sends the following event when a new in-room
control panel is applied:
•
Introduction
As a response to this event, the control system should send
Create a user interface
commands to initialize all widgets so that they reflect the true status
of the room settings.
How to register:
API for in-room control API for in-room control
xfeedback register event/UserInterface/Extensions/Widget/
Example:
Widgets
Command reference
Troubleshooting
Tips and tricks
Examples
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
LayoutUpdated - sent when a new in-room control panel for
Touch 10 is exported to the video system
LayoutUpdated
Terminal output mode:
*e UserInterface Extensions Widget LayoutUpdated
** end
XML output mode:
<Event>
<UserInterface item="1">
<Extensions item="1">
<Widget item="1">
<LayoutUpdated item="1"/>
</Widget>
</Extensions>
</UserInterface>
</Event>
17