(1) position control lever
(A) "doWN"
6. lower the attachment by pushing
the position control lever toward.
ImPORTANT
make sure that no one is around
the implement or behind the
tractor.
DS3510(UM26)-AU-05.indd 5
U26o503a
(1) Hand Throttle lever
"Increase"
7. Set the hand throttle lever into the
neutral position.
8. depress the clutch pedal.
U26o504a
(1) key switch
"decrease"
(B) Heat
(d) "Acc"
9. Insert the key into the key switch
and turn it "oN". maintain it until
the preheat lamp is turned "off".
(approx. 8 sec)
5
-
5
opERATIoN
U26o404a
(A) Start
5
(c) "oN"
(E) "off"
2010-12-31 오후 3:40:54