Abs Disabling - Ducati Monster 696 ABS Owner's Manual

ABS disabling

This function deactivates the ABS control unit.
Attention
This operation must be carried out with the
vehicle stopped (key ON).
To disable the ABS control unit, enter the menu at
"DISAB ABS" page and hold button (1, Fig 14) pressed
in position B " " for 3 seconds.
At the end of the 3 seconds, the flashing ABS light
(10, Fig 8) on the instrument panel indicates the
disabling.
From this moment, the ABS control unit is disabled;
it is automatically restarted at the next Key-Off / Key-
On.
At the next Key-On the instrument panel indicates
that it is operative by keeping the ABS light
(10, Fig 8) off.
If there are problems with the ABS system, the
instrument panel indicates its malfunction by keeping
the ABS light (10, Fig 8) on steady, the EOBD light
(8, Fig 8) on steady and the ABS error in the menu.
Important
This indicator is activated only at a speed above
or equal to 10 km/h; at a speed lower than 10 km/h
the ABS control unit does not perform the
diagnostics.
Fig 34
65