Insert the right (6) and left tank retaining screws (4),
with nylon washers (7), and (5).
Tighten the screws (1) and (2) to a torque of 1.48 lbf-
ft (2 Nm) ±10%, starting from the screws (2) around
the cap.
Tighten the screws (4) and (5) to a torque of 1.48 lbf-
ft (2 Nm) ±10%.
Refit the seat page 97.
142
4
7
6
1
5
Fig 108
2
Fig 109
3
1