DDA data logger
MENU
This function allows activating the DDA (Ducati Data
Analyzer): data logger must be connected to vehicle
wiring.
To enable this function, enter the menu and set the
"DDA" data acquisition to "On" by holding the button
Press B for 3s
(1, Fig 14) pressed in position B "
" for 3 seconds.
The START/STOP control for the data logger lap
Press B for 3s
separator is the high-beam flash button FLASH
(12, Fig 14) on the LH switch. If the DDA function is
active and the display is suddenly switched off (Key-
Off), the function is switched off automatically.
Fig 32
61