Table of Contents
Advertisement
Riding the motorcycle
Running-in recommendations
Maximum rpm
Rotation speed for Break-in period and during
standard use (rpm):
1) Up to 621 mi (1000 km);
2) 621 mi (1000 km) to 1553 mi (2500 km).
Up to 621 mi (1000 km)
During the first 621 mi (1000 km) keep an eye on the
rev counter, it should never exceed 5,500÷6,000
rpm.
During the first few hours of riding, it is advisable to
run the engine at varying load and rpm, though still
within recommended limit.
To achieve this, roads with plenty of bends and even
slightly hilly areas are ideal for the most efficient
break-in of the engine, brakes and suspensions.
For the first 62 mi (100 km), use the brakes gently.
Avoid sudden or prolonged braking. This will allow the
friction material on the brake pads to bed in against
the brake discs.
So that the mechanical parts of the motorcycle can
adapt to each another, and especially so the life of the
basic engine parts is not affected, avoid harsh
accelerations and do not run the engine at a high rpm
for an extended time, especially uphill.
It is also advisable to inspect the drive chain
frequently and lubricate as required.
103
Advertisement
Table of Contents
