Replacing The Bulbs - Ducati Monster 696 ABS Owner's Manual

Replacing the bulbs

Before replacing a blown bulb, make sure that the
replacement bulb has the same voltage and power as
that specified in the paragraph "Electrical System"
page 171.
Important
Have the bulbs changed at a Ducati Dealer or
authorized Service Center.
Loosen screw (1) and separate the lens (2) from turn
indicator mount.
The bulb is of the banjo-type: press and rotate
anticlockwise to remove. Fit the spare bulb by
pressing and turning clockwise until it clicks. Refit the
lens inserting the tab in the relevant slot on turn
indicator mount. Refit and tighten the screw (1).
146
2
1
Fig 112