Table of Contents
Advertisement
For M_MTX and S_MTX controller types, <PARAMETER 1> is the matrix input channel
number in the range 1 to16, <PARAMETER 2> is the matrix output channel number
in the range 1 to 6, <PARAMETER 3> is the target level of the addressed matrix node
controller and must be in range 0 to 255. As for other controller types, proper values of
<PARAMETER 3> can be computed by applying the same formulas reported above
(used to calculate second parameters of other level controllers types).
If command execution succeeds, the device will respond to the above command as
follows:
ACK SET_LEVEL <CONTROLLER TYPE> <PARAMETER 1> <PARAMETER 2>
<PARAMETER 3><CR>
EXAMPLE 1:
Sets master input 2 fader level to 0 dB on the master unit.
The device will respond to the above command with the following string:
ACK SET_LEVEL M_IN 2 229<CR>
EXAMPLE 2:
Sets slave input 2 fader level to +6 dB on the slave unit.
EXAMPLE 3:
Sets master input 2 to master output 4 matrix node level to –12 dB.
50
SET_LEVEL M_IN 2 229<CR>
SET_LEVEL S_IN 10 245<CR>
SET_LEVEL M_MTX 2 4 199<CR>
Advertisement
Table of Contents
