Table of Contents
Advertisement
UNIT SETTINGS
Select either MASTER for the MASTER unit or SLAVE for the SLAVE unit.
LINK CONFIG
Select either MASTER ONLY if there is a single MZ 8060 or MASTER + SLAVE
for two MZ 8060 linked each other.
The MASTER + SLAVE setting enables all SLAVE unit software controls.
SYSTEM CONFIG CONTROL
Click SAVE to save the current software configuration to MZ 8060.
The configuration includes the MASTER / SLAVE settings, the initial PRESET, audio
input settings (e.g. PHANTOM power, phase, MIC/LINE settings, digital trimmers),
logic inputs and outputs, all labels, remote controls and groups.
Click LOAD to load (into the software) the configuration previously saved to MZ
8060.
UNITS RESET
Click RESET to reset all MZ 8060.
PRESET MANAGER
It is possible to store and recall up to 16 different presets.
Click UNIT SETTINGS (in the main window) to open the 'Global settings'
window, which includes the preset manager.
SAVE: saves the current settings to the selected preset (chosen from 1 to 16 in
the PRESET list).
A NAME (text box) can be given to each preset.
Note:
to save all preset names too
. c
UNIT SETTINGS
configuration
lick
SYSTEM CONFIG CONTROL.
RECALL: recalls the selected preset (previously saved).
w
:
arning
save currenT seTTings To a PreseT before recalling anoTher one
(
oTherwise all currenT seTTings will be losT
STARTUP CONFIG
It allows to choose which preset will be loaded as first after MZ 8060 start-up:
- FIXED PRESET, the one chosen in the PRESET list.
- LAST PRESET, the last saved or recalled preset (in chronological order).
,
it is necessary to save the entire
,
SAVE
in the main window
then
)!
PRESET MANAGER
in
15
Advertisement
Table of Contents
