Table of Contents
Advertisement
AUDIO OUTPUT SETTINGS
Each audio output has a level bar
0 dB is the peak level before distortion.
All audio output controls are now listed.
EDIT
2
opens or closes the setting window of both the equalizer and the limiter.
EQ
3
toggles the parametric equalizer.
Click EDIT
to access its parameters.
2
LIM
4
toggles the limiter.
Click EDIT
to access its parameters.
2
ALC
5
toggles the automatic level control that operates according to the ambient
noise detected by a microphone (connected to the input no.8).
Read the 'Automatic Level Control (ALC)' manual section.
DELAY
6
delay time setting (in milliseconds, up to max. 5 seconds) applied to the
output signal.
Except in specific cases (e.g. second line loudspeakers to be delayed), leave this
parameter to 0.
OUTPUT (n)
7
: audio output label that can be edited after a double-click on the text.
MUTE
8
(when lit) mutes the audio output.
SOLO
9
(when lit) open the selected output only (and mutes all the others).
Audio output level control.
10
The level can be adjusted by moving the fader (by keeping it with the mouse left button)
or directly changing its value (above the fader: click the number and then insert the new
value with the numeric keyboard).
1
, from –60 to 0 dB.
AUDIO OUTPUT SETTINGS
1
2
3
4
5
6
7
8
9
10
27
Advertisement
Table of Contents
