Control Group; Mute Group - RCF MZ 8060 User Manual

CONTROL GROUP

CTRL GROUP (n): group name that can be
edited after a double-click on the text.
EDIT: opens the window of audio input / output
selection.
The green light beside (when lit) means that at least one input / output has been selected
(if the light is off, the group has not been configured yet).
FADER: group level control (default setting: 0 dB). The level can be adjusted by moving
the fader (by dragging it with the mouse left button) or directly changing its value (click
the number and then insert the new value with the numeric keyboard).
ENABLE: toggles the group (keep it on when using).

MUTE GROUP

MUTE GROUP (n): group name that can be edited after a double-click on the
text.
EDIT: opens the window of audio input / output selection.
The green light beside (when lit) means that at least one input / output has been selected
(if the light is off, the group has not been configured yet).
ENABLE: toggles the group (keep it on when using).
ASSIGNMENT OF AUDIO INPUTS AND OUTPUTS TO A GROUP
Click EDIT of either a CONTROL or MUTE group to open the
window of audio input / output selection.
MASTER INPUTS: click checkboxes to select the MASTER unit
audio inputs to be included in the group.
SLAVE INPUTS: click checkboxes to select the SLAVE unit
audio inputs (if available) to be included in the group.
OUTPUT: click checkboxes to select the audio outputs (of either the MASTER or SLAVE
unit currently selected) to be included in the group.
DESELECT: clear all checkboxes.
After selecting audio inputs and outputs, close the window (by clicking the X in the top
right-hand corner).
34
CONTROL GROUP
MUTE GROUP
ASSIGNMENT OF AUDIO INPUTS
AND OUTPUTS TO A GROUP