Audio Outputs And Slave Unit Controls - RCF MZ 8060 User Manual

The 6 audio outputs (A-F) of the MASTER unit (single or first MZ 8060) are on the right of
the software main window.
n : 6
ote all controls of the
)
present can be enabled by clicking
masTer+slave link config
as
On the far right of the software main window, there are two buttons to choose
which MZ 8060 needs to be edited: click either MASTER to access all MASTER unit
parameters or SLAVE (if enabled) for all SLAVE unit parameters.
master slave
and outputs have different background colours
n ,
ow it is possible to select the
n :
ote
slave
after selecting the outputs
26

AUDIO OUTPUTS AND SLAVE UNIT CONTROLS

slave (
audio outputs of the unit optional second
unit settings
in the main window and then selecting
.
choice
slave .
unit audio inputs too
, / (gpi/gpo)
the logic input output
mz 8060,
if
.
.
settings are not available