Replacing The Power Supply Units - Lanner FW-8896A User Manual

Replacing the Power Supply Units

Power supply units may wear down eventually. Please
be noted that FW-8896 series supports 600W/800W
depending on the ordering preferences. Please prepare
the power supply units matching this capacity.
1. Locate the power supply units.
2. Loosen one of the lock-screws depending on which
power supply unit is to be replaced.
3. Hold the handle and pull it out.
4. Locate the internal connector of the power supply unit.
5. Insert a new power supply unit.
6. Remember to tighten the lock-screws.