Installing The Cfast Card - Lanner FW-8896A User Manual

Installing the CFast Card

FW-8896 provides one CFast slot. Follow the procedures
below for installing a CFast card.
1. Locate the CFast socket.
2. Remove the protection cover.
3. Insert a CFast card until completed seated.
Installing CPU and the Heat Sink
Follow the procedures below for installing a CPU
1. Locate the CPU socket(s)
2. Press the left load lever down, move it out of the
retention tab. Then, do the same to the right. There are
two levers for each CPU socket.
Press down
3. Lift the load levers.
Press down
4. Open the load plate and also the protective cap.
5. Align the CPU and the notch on the socket. The CPU
should fit perfectly into the socket. Note that the CPU
fits in the socket in only one direction.
6. Put the protective cap onto the CPU. Close the load
plate and push the load lever to lock it back to the
retention tab.
Load plate
Protective cap