Lanner FW-8896A User Manual page 31

Installing Slide Rails
1. In the previous section, you have already detached the
inner brackets and attached them onto the chassis of
your purchased model. By now, you shall install the slide-
rail assemblies onto the rack.
As the image below, this slide-rail kit does NOT require
screw-fixing. Simply aim at 3 available screw holes on the
rack-front and lock it by clipping the slide-rail assembly to
the rack-front as shown in the image below. You should
hear a "click" sound once it is firmly attached.
2. For the rear rack installation, also aim at 3 available
holes and click the slide-rail assembly onto the rear rack.
Click
3. Repeat Step 1 and 2 for another slide-rail assembly in
order to install in onto the rack.