Installing The Nic Modules - Lanner FW-8896A User Manual

Installing the NIC Modules

FW-8896 series comes with 8 NIC Ethernet module slots
for network bandwidth expansion. Please follow the steps
for installation.
1. Select a NIC Ethernet module slot.
2. Rotate and loosen the two lock-screws.
3. Remove the door and aim at the PCIe socket for module
insertion.
4. Insert your NIC Ethernet module. (Note: the module
shown in the image below is for reference only).
5. Once the module is firmly seated, rotate and tighten the
two lock-screws.