Network Computing Platforms
Installing Ethernet NIC Modules
NCA-5510 can fit up to 4 Ethernet NIC modules to expand its network throughput. Please
follow the instructions below.
Notes: For information about compatible modules, please refer to the "Ordering Information"
and "Optional Accessories" sections, or contact Lanner for more details.
1. Remove the two screws on the bezel of the module slot and open the bezel. It is strongly
recommended to use mini-sized screwdriver to perform this task.
2. Position the gold finger of module as shown in the image below. When sliding the module
into the slot, make sure the module stays in the guides of the expansion slot.
3. Slide your Ethernet NIC module into the space, until it is firmly attached.