Installing The System Memory; Installing An Ipmi Card - Lanner HTCA-6600 User Manual

Hide thumbs Also See for HTCA-6600:

Table of Contents

Network Computing Platforms

Installing the System Memory

Please follow the steps below to install the DIMM memory modules.

1. Power off the system and locate the DDR DIMM slot.

2. Pull open the DIMM slot latches

3. Align the DIMM module and make sure the notches of the module aligned with the socket

keys in the slot.

4. Insert the module into the slot until it's firmly seated and close the latches.

The motherboard provides one OPMA socket which is used to install an IPMI card. Please

follow the steps below for instructions.

1. Locate the OPMA socket.

2. Insert an IPMI card into the socket and then gently press it down. Remember to align the

gold fingers and make sure the two clips securely secure the card.

Clip

Table of Contents