Dual Time; Configuring Dual Time Settings; Swapping The Home City Time And Dual Time; Alarms And Hourly Time Signal - Casio 5554 Operation Manual

Dual Time

Dual Time lets you look up the current time in
various time zones around the globe.
Getting Ready
Enter the Dual Time Mode.
Navigating Between Modes
l
Configuring Dual Time
Settings
Dual Time lets you set the current time in
another time zone in addition your current
location time.
1.
Hold down (A) for about two seconds.
This causes the hour digits to flash.
Hours
2.
Use (D) and (B) to change the hour setting.
3.
Press (C).
This causes the minute digits to flash.
Minutes
4.
Use (D) and (B) to change the minute
setting.
You can change the setting in 15-
●
minute increments.
5.
Press (A) to exit the setting screen.
Operation Guide 5554
Swapping the Home City
Time and Dual Time
1.
Enter the Dual Time Mode.
Navigating Between Modes
l
2.
Hold down (B) for about two seconds.
This swaps the Home City time and Dual
Time.
Before swapping
Current location time
Dual Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Alarms and Hourly Time
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
Getting Ready
Enter the Alarm Mode.
l
After swapping
Dual Time

Configuring Alarm Settings

1.
Current location time
2.
3.
Signal
Navigating Between Modes
Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the number of the
alarm you want to configure is displayed.
Alarm number
Hold down (A) for about two seconds.
This causes the hour digits to flash.
Hours
Use (D) and (B) to change the hour setting.
If you are using 12-hour timekeeping,
●
[P] indicates p.m.
16