Moving To Another Time Zone; Other Information; Supported Phones; Specifications - Casio 5554 Operation Manual

Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time (Dual Time)
setting to the current time at your
destination.
Current time
Destination time
Using G-SHOCK Connected to
l
Configure Settings
Using Watch Operations to Configure
l
Settings
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
Operation Guide 5554
In the aircraft, before arriving at your
●
destination
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping
Destination time
Using G-SHOCK Connected to
l
Configure Settings
Using Watch Operations to Configure
l
Settings
After Arriving
●
1.
Adjust the time setting.
Triggering Immediate Time
l
Adjustment
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft

Other Information

This section provides non-operational
information you also need to know. Refer to
this information as required.

Supported Phones

For information about phones that can
connect with the watch, visit the CASIO
website.
http://world.casio.com/os_mobile/wat/

Specifications

Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by communication with a phone
is not possible.
After swapping
Timekeeping :
Destination time
Analog
Hour, minute (moves every 20 seconds)
Digital
Hour, minute, second, month, day, day of
the week, a.m./p.m. (P)/24-hour time
format, full auto calendar (2000 to 2099)
Summer Time
Pedometer :
Step count measurement using a 3-axis
accelerometer
Step count display range: 0 to 999,999 steps
Step indicator
Step count graph
Step count reset
Auto zero-reset at midnight each day
Manual reset
Daily step goal setting
Step count setting unit: 1,000 steps
Step count setting range: 1,000 to 50,000
steps
Step count accuracy
±3% (According to vibration testing)
Power Saving
Stopwatch/Data Recall :
Measuring unit
1/100 seconds (first hour); 1 second
(after first hour)
Measuring range: 23 hours 59 minutes 59
seconds
Measurement Functions:
Normal elapsed time; cumulative time;
lap/split times; 200-record data memory
Target time alarm:
Up to 10 time settings; watch beeps (for 10
seconds) when a target time is reached
Timer :
Measuring unit: 1 second
Measuring range: 60 minutes
Number of intervals: 1 to 5
Number of auto repeats: 1 to 20
Time setting unit: 1 second
Time setting range: 1 second to 60 minutes
Final 5-second countdown, time-up beeper
Auto Start
20