Advertisement

MO1803-EA
© 2018 CASIO COMPUTER CO., LTD.
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under "Operating Precautions" and "User Maintenance".
E
Things to check before using the watch
1. Check the battery power level.
In the Timekeeping Mode, press C to display the battery power indicator.
Is HI or MID indicated as the battery power indicator (page E-12)?
E-2
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under "To configure Home City settings" (page E-24) to configure your
Home City and daylight saving time settings.
Important!
Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
3. Set the current time.
See "Configuring Current Time and Date Settings" (page E-27).
The watch is now ready for use.
E-4
Configuring Current Time and Date Settings ..........................................E-27
To change the current time and date settings ....................................E-27
Using the World Time Mode ..................................................................E-31
To enter the World Time Mode ......................................................E-31
To view the time in another city ......................................................E-32
To specify standard time or daylight saving time (DST) for a city ............E-32
To swap your Home Time and World Time Cities ..............................E-34
Using the Countdown Timer ..................................................................E-35
To enter the Countdown Timer Mode ................................................E-35
To specify the countdown start time ................................................E-35
To perform a countdown timer operation ..........................................E-37
To stop the alarm ........................................................................E-37
E-6
Hand Home Position Adjustment .........................................................E-45
To adjust home positions ...............................................................E-45
Other Settings ....................................................................................E-47
To enable or disable the button operation tone .................................E-47
To enable or disable Power Saving ................................................E-49
Troubleshooting .................................................................................E-50
Specifications ....................................................................................E-53
Operating Precautions ........................................................................E-55
User Maintenance ..............................................................................E-66
E-8
Operation Guide 5576
YES
Battery power indicator
NO
About This Manual
Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All examples in this
manual are shown using dark figures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
The watch is charged.
For details about charging, see "Charging the Watch" (page E-9).
Go to step 2.
Power is low. Charge the watch by placing it in a location where it is exposed to
light. For details, see "Charging the Watch" (page E-9).
Contents
About This Manual .............................................................................. E-1
Things to check before using the watch ................................................ E-2
Charging the Watch .............................................................................. E-9
To recover from the sleep state ......................................................E-17
Mode Reference Guide ........................................................................E-18
Timekeeping .......................................................................................E-23
Configuring Home City Settings ............................................................E-24
To configure Home City settings ......................................................E-24
To change the Daylight Saving Time (summer time) setting ..................E-25
Using the Stopwatch ...........................................................................E-38
To enter the Stopwatch Mode .........................................................E-38
To perform an elapsed time operation .............................................E-39
To measure split times ..................................................................E-39
To measure two finishes ...............................................................E-40
Using the Alarm .................................................................................E-41
To enter the Alarm Mode ...............................................................E-41
To set the alarm time .....................................................................E-42
To turn the alarm on or off ............................................................E-43
To stop a sounding alarm ...............................................................E-43
To turn the hourly time signal on or off .............................................E-43
Illumination .......................................................................................E-44
To turn on illumination ..................................................................E-44
Charging the Watch
The face of the watch is a solar panel that generates power from light. The generated
power charges a built-in rechargeable battery, which powers watch operations. The
watch charges whenever it is exposed to light.
Charging Guide
Whenever you are not
wearing the watch, leave it
in a location where it is
exposed to light.
Best charging
performance is achieved
by exposing the watch to
the strongest light
available.
E-1
NEXT
E-3
E-5
E-7
When wearing the watch,
make sure that its face is
not blocked from light by the
sleeve of your clothing.
The watch may enter a
sleep state (page E-16) if its
face is blocked by your
sleeve even only partially.
E-9

Advertisement

Table of Contents
loading

Summary of Contents for Casio 5576

  • Page 1 © 2018 CASIO COMPUTER CO., LTD. Operation Guide 5576 About This Manual ENGLISH Congratulations upon your selection of this CASIO watch. • Depending on the model of your watch, display text appears either as dark figures on a light background, or To ensure that this watch provides you with the years of service for which it is light figures on a dark background.
  • Page 2: Mode Reference Guide

    Operation Guide 5576 Warning! Power Levels Leaving the watch in bright light for charging can cause it to become quite hot. In the Timekeeping Mode, press C to display the battery power indicator. Take care when handling the watch to avoid burn injury. The watch can become particularly hot when exposed to the conditions below for long periods.
  • Page 3: Configuring Home City Settings

    Operation Guide 5576 Selecting a Mode Press C to cycle between modes. • Countdown Timer Mode Stopwatch Mode In any mode (except when a setting screen is on the display), press B to illuminate • the face of the watch.
  • Page 4: Using The World Time Mode

    Operation Guide 5576 Note Using the World Time Mode • For information about selecting a Home City and configuring the DST setting, see “Configuring Home City Settings” (page E-24). You can use the World Time Mode to view the current Currently selected World •...
  • Page 5: Using The Alarm

    Operation Guide 5576 To measure two finishes Using the Alarm When an alarm is turned on, an alarm tone will sound for Start Split Stop Split release Reset On/Off status about 10 seconds each day when the time in the...
  • Page 6: Troubleshooting

    After submersion in seawater, use plain water to rinse all salt and dirt from your stop using your watch and take it to your original retailer or to an authorized CASIO watch.
  • Page 7: User Maintenance

    For a resin band, wash with water and then wipe dry with a soft cloth. Note that using your watch and take it to your original retailer or to an authorized CASIO sometimes a smudge like pattern may appear on the surface of a resin band. This service center.
  • Page 8 Operation Guide 5576 City Code Table City UTC Offset/ City UTC Offset/ City UTC Offset/ City UTC Offset/ City City City City Code GMT Differential Code GMT Differential Code GMT Differential Code GMT Differential PPG Pago Pago –11 Praia –1...

Table of Contents