Connection; Canceling A Connection With A Phone; Using The Watch In A Medical Facility Or Aircraft; Unpairing - Casio 5554 Operation Manual

Connection

Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
X Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Move the phone close to (within one meter
of) the watch.
3.
X After confirming that e is not displayed,
hold down (D) for about two seconds.
When a connection is established
between the watch and phone, e will stop
flashing.
Trying to connect Connection successful
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (D) button
for about two seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Operation Guide 5554
Canceling a Connection with a
Phone
To terminate a Bluetooth connection, press
any watch button besides (L).
Connected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (D) for about two seconds.
When a connection is established
between the watch and phone, e will stop
flashing.
Trying to connect
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

1.
X If the watch is connected with a phone,
press any button besides (L) to terminate
the connection.
Connected
2.
Y Tap the "G-SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
After disconnection

Auto Time Adjustment

You can configure watch settings to connect
with a phone at preset times each day and
adjust its time settings in accordance with
information obtained from an online time
server.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. It
performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Connection successful
Important!
Note
After disconnection
C Pair the watch with a phone.
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While it is too far away from its paired
ー
phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
If G-SHOCK Connected is not
ー
running on the phone.
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand Alignment
l
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
4