Page 1: Table Of Contents
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Casio G-Shock GG-B100 Nero o cerca il tuo prodotto tra le migliori offerte di Smartwatch e Orologi Sportivi MA1908-EC © 2019 CASIO COMPUTER CO., LTD. Operation Guide 5594 Temperature Measurement Contents Connection Checking the Current Temperature Connecting with a Phone Before Getting Started...
Page 2 Operation Guide 5594 Pedometer Counting Steps Causes of Incorrect Step Count Hand Alignment Adjustment Adjusting Hand Alignment Other Settings Enabling the Button Operation Tone Reflecting Altitude Differential in Activity Measurements Returning the Watch to Its Factory Default Settings International Travel Other Information City Table Summer Time Table...
Page 3: Before Getting Started
This section provides an overview of the watch battery. ① ② ③ and introduces convenient ways it can be used. Request battery replacement from a CASIO service center or your original retailer. Important! ④ This watch is not a special-purpose ● measuring instrument. Measurement function readings are intended for general reference only.
Page 4: Mode Overview
Operation Guide 5594 Altimeter Mode ● Note Note Use this mode to take an altitude reading for your current location. You can use G-SHOCK Connected to You can use G-SHOCK Connected to ● ● Altitude Measurement change the arrangement of modes, or add the items below to the display.
Page 5: Shifting The Hands
Operation Guide 5594 Altitude Record Recall Mode Timer Mode World Time Mode ● ● ● Use this mode to view altitude records. Use this mode to countdown from a desired This mode shows the current time in 38 cities Viewing Altitude Records start time.
Page 6: Viewing The Face In The Dark
Operation Guide 5594 Viewing the Face in the Dark Useful Features Note The face of the watch can be illuminated for Pairing the watch with your phone makes a Auto Light is disabled when any one of ● viewing in the dark. number of the watch’s features easier to use.
Page 7: Time Adjustment
Getting Ready Use (A) and (C) to change the Home City. Your phone needs to have the CASIO “G- For details refer to the information If your phone cannot connect with the ●...
Page 8: Using The Watch In A Medical Facility Or Aircraft
Operation Guide 5594 Setting the Time/Date Switching between 12-hour and 24- ● ● Using the Watch in a Medical hour Timekeeping Facility or Aircraft Enter the Timekeeping Mode. You can specify either 12-hour format or 24- Navigating Between Modes hour format for the time display. Whenever you are in a hospital, on an aircraft, Hold down (D) for at least two seconds.
Page 9: Using Mobile Link With A Mobile Phone
While the watch is too far away from ー In Google Play or the App Store, search for the its paired phone Note CASIO “G-SHOCK Connected” app and While communication is not possible ー install it on your phone. due to radio interference, etc.
Page 10: Mode Customization
Operation Guide 5594 Triggering Immediate Time Adjustment ● Mode Customization Note The watch’s time setting will be adjusted automatically whenever you establish a You can use G-SHOCK Connected to Increasing or decreasing the number ● connection between the watch and a phone. customize modes by rearranging them on the of modes may change mode functions Whenever you want to adjust the watch’s time...
Page 11: Customizing The Timekeeping Mode Screen
Operation Guide 5594 Customizing the Recording Your Current Y Tap the “G-SHOCK Connected” icon. Timekeeping Mode Screen Location (Location Memory) X Hold down (B) for at least two seconds You can use G-SHOCK Connected to You can use G-SHOCK Connected to record until the second hand points to [R] twice.
Page 12: Checking The Distance And Bearing To A
Operation Guide 5594 Checking the Distance and Note X Hold down (C) for at least two seconds Bearing to a Location until [INDICATE] starts to flash. Release Memory Point (Location Location Indicator remains enabled for the button when the second hand moves ●...
Page 13: Auto Altitude Calibration
Operation Guide 5594 Data Transfer Auto Altitude Calibration Recording Waypoints and ● Their Altitudes (Mission Log) After Mission Log is enabled, data transfer Enabling auto altitude calibration with G- starts when the number of altitude records in SHOCK Connected will cause altitude values watch memory reaches 30.
Page 14: Configuring World Time Settings
Operation Guide 5594 Configuring the Summer Time Setting Swapping Your World Time and Home Configuring World Time ● ● Time Settings Y Tap the “G-SHOCK Connected” icon. Y Tap the “G-SHOCK Connected” icon. X Hold down (B) for at least two seconds Specifying a World Time City with G-SHOCK until the second hand points to [R] twice.
Page 15: Phone Finder
Operation Guide 5594 Phone Finder Configuring Watch Settings Changing the Home City Summer Time Setting You can use phone finder to trigger a tone on You can use G-SHOCK Connected to the phone to make it easy to find. The tone is configure the settings below.
Page 16: Canceling A Connection With A Phone
Operation Guide 5594 Deleting Pairing Information from the ● Important! Y Tap the “G-SHOCK Connected” icon. Watch X Hold down (B) for at least two seconds If you have problems establishing a ● X Hold down (E) for at least two seconds until the second hand points to [R] twice.
Page 17: Digital Compass
Operation Guide 5594 Digital Compass Calibrating the Compass Note You can use the Digital Compass Mode to Calibrating Compass Readings Normally the Compass Mode ● determine the direction of north, and to check indicates magnetic north. You can also your bearing to a destination. Perform figure 8 or two-point calibration configure settings to indicate true whenever you notice the watch’s compass...
Page 18: Setting Up For True North Readings (Magnetic Declination Calibration)
Operation Guide 5594 2-Point Calibration Auto Calibration Enter the Compass Mode. Your watch performs auto bearing calibration. Enter the Compass Mode. Navigating Between Modes When bearing calibration starts, the second Navigating Between Modes ● Hold down (D) for at least two seconds. hand will move to 12 o’clock, and the digital Hold down (D) for at least two seconds.
Page 19: Magnetic North And True North
Operation Guide 5594 Altitude Measurement Magnetic North and True Checking the Current North Altitude The watch takes altitude readings and displays results based on air pressure There are actually two types of north: measurements taken by a built-in pressure Enter the Altimeter Mode. magnetic north and true north.
Page 20: Calibrating Altitude Readings (Offset)
Operation Guide 5594 Interpreting Altitude Graph Contents Enter the Altimeter Mode. Use (A) to select [DIFF]. Navigating Between Modes Each press of (A) cycles through the settings shown below. Hold down (D) for at least two seconds. [DIFF]: Second hand indicates altitude Release the button when [SET] starts to differential.
Page 21: Setting The Auto Measurement Interval
Operation Guide 5594 Setting the Auto Recording Altitude Readings Hold down (L) for at least two seconds to Measurement Interval set your current location’s altitude as the Use the procedure below to record altitude reference altitude. measurements manually. Auto You can select an auto measurement interval This causes [DIFF CLR] to stop flashing measurements are also recorded of either five seconds or two minutes.
Page 22: Specifying The Altitude Measurement Unit
Operation Guide 5594 Auto Altitude Data Recording Altitude Reading ● Specifying the Altitude Precautions The altitude data described below is recorded Measurement Unit automatically while the watch is in the Altitude Mode. One record each is maintained in Effects of Temperature You can select either meters (m) or feet (ft) as memory for each of these items.
Page 23: Checking The Current Barometric Pressure
Operation Guide 5594 Checking the Current Checking Changes in Note Barometric Pressure Barometric Pressure Over Time If you switch to the two-minute ● Enter the Barometer Mode. measurement interval graph, the Navigating Between Modes The watch can be configured to show a graph watch will automatically return to the of pressure readings taken every two hours or two-hour measurement interval graph...
Page 24: Checking The Change In Barometric Pressure Between Two Readings
Operation Guide 5594 Checking the Change in Note Important! Barometric Pressure between Two Readings If the barometric pressure differential is To ensure correct barometric pressure ● ● greater than +10 hPa (when the change indicator operation, enable it in measurement interval is two hours) or a location where the altitude is When you perform the procedure below in the +1 hPa (when the measurement...
Page 25: Calibrating Barometric Pressure Readings
Operation Guide 5594 Temperature Calibrating Barometric Enter the Timekeeping Mode. Pressure Readings (Offset) Measurement Navigating Between Modes Hold down (D) for at least two seconds. The watch’s pressure sensor is adjusted at the The watch can be used to take current air Release the button when the name of the factory and normally does not require temperature readings.
Page 26: Calibrating Temperature Readings (Offset)
Operation Guide 5594 Calibrating Temperature Enter the Timekeeping Mode. Viewing Altitude Readings (Offset) Navigating Between Modes Records Hold down (D) for at least two seconds. The watch’s temperature sensor is adjusted at Release the button when the name of the the factory and normally does not require You can use the Altitude Record Recall Mode currently selected Home City appears on...
Page 27: Deleting A Particular Record
Operation Guide 5594 Sunrise and Sunset Cumulative ascent and cumulative Note descent Times Example: Cumulative ascent If there is no data left in memory due to ● You can use the watch to check sunrise and Date when a data delete operation, error, or some accumulation started.
Page 28: Stopwatch
Operation Guide 5594 Stopwatch Measuring a Split Time Setting the Timer Start Time The stopwatch measures elapsed time in The countdown start time can be set in 1- Enter the Stopwatch Mode. 1/100-second units for the first hour, and in 1- minute units up to 24 hours.
Page 29: Using The Timer
Operation Guide 5594 Using the Timer Configuring Alarm Settings Note A beeper sounds for 10 seconds when Enter the Timer Mode. Enter the Alarm Mode. ● an alarm time is reached. Navigating Between Modes Navigating Between Modes You can also use G-SHOCK ●...
Page 30: Turning Off An Alarm Or The Hourly Time Signal
Operation Guide 5594 Turning Off an Alarm or the World Time City Setting Note Hourly Time Signal Use the procedure in this section to select a (alarm) is still displayed, it means ● World Time city. If you are in an area that To stop an alarm or the hourly time signal from that another alarm is still turned on.
Page 31: Swapping Your Home City Time And World Time
Operation Guide 5594 Pedometer To check the step count ● Note Displaying the step count screen. You can use the pedometer to keep track of Mode Overview While [UTC] is selected as the city, you your step count while walking, engaging in ●...
Page 32 Operation Guide 5594 Hand Alignment Other Settings Reflecting Altitude Adjustment Differential in Activity This section explains other watch settings you Measurements can configure. Strong magnetism or impact can cause the time indicated by the analog hands to become You can use the procedure below to specify different from the time on the digital display.
Page 33 Operation Guide 5594 International Travel Other Information Returning the Watch to Its Factory Default Settings Use the procedure below to easily change day This section provides non-operational and time settings of the watch to a destination information you also need to know. Refer to location.
Page 34 Measurement unit: 1 hPa (or 0.05 inHg) Barometric pressure graph For information about phones that can Barometric pressure indicator (-10 to +10 connect with the watch, visit the CASIO hPa/-1 to +1 hPa (or -0.25 to +0.25 website. inHg/-0.05 to +0.05 inHg)) Barometric Pressure Change Indications https://world.casio.com/os_mobile/wat/...
Page 35 Operation Guide 5594 Temperature : Alarm : Other : Measuring range: -10.0 °C to 60.0 °C (or Time alarms High-brightness DOUBLE LED light (Auto 14.0 °F to 140.0 °F) Number of alarms: 5 Light, afterglow); illumination duration Display range: -10.0 °C to 60.0 °C (or 14.0 Setting units: Hours, minutes setting;...
Page 36 ● under applicable radio laws may be a transferred each hour) (pairing) connection between the criminal offense. For details, visit the CASIO watch and phone. When in a hospital, on an aircraft, or in any Website. other area where the use of radio waves is not https://world.casio.com/ce/BLE/...
Page 37 Operation Guide 5594 I can’t reconnect the watch Phone-Watch Connection I can’t connect while my phone is in the Airplane Mode. and phone. Connection with the watch is not possible I can’t establish a connection while the phone is in the Airplane Mode. After between the phone and watch.
Page 38 Auto time adjustment will Reference Point If [ERR] keeps appearing after multiple ● resume 24 hours after either of the above attempts, contact a CASIO service center or operations is performed. [ERR] appears during measurement. your original retailer. Is auto time adjustment enabled? There may be a problem with the sensor.
Page 39 Are phone settings configured to acquire Recording Your Current Location appearing after multiple measurement GPS information? (Location Memory) attempts, contact a CASIO service center or You may experience problems acquiring your original retailer. Are phone settings configured to acquire GPS information in environments like the location information? ones described below.
Page 40 Watch is connected with a phone to adjust ● Contact a CASIO service center or your its time setting. original retailer. Auto Time Adjustment The current time indicated by the...

This manual is also suitable for:

5594

Casio G-Shock GG-B100 Operation Manual

Quick Links

Related Manuals for Casio G-Shock GG-B100

Summary of Contents for Casio G-Shock GG-B100

This manual is also suitable for:

Table of Contents