Latched Settings For All Devices In Sa/Sx/Sc Series Mpu - Delta DVP-PLC Applications Manual

N For Master control loop
P For CJ, CALL instructions
External interruption
Timed interruption
I Interruption
Interruption inserted when
high-speed counter
reaches target
Communication interruption I150, 1 point
K Decimal form
H Hexadecimal form
*1. Non-latched area cannot be modified.
*2. The preset non-latched area can be modified into latched area by setting up parameters.
*3. The preset latched area can be modified into non-latched area by setting up parameters.
*4. The fixed latched area cannot be modified

Latched settings for all devices in SA/SX/SC series MPU:

General purpose
M0 ~ M511
M
(Auxiliary relay)
It is fixed to be non-latched
T
T0 ~ T199
(Timer)
It is fixed to be non-latched It is fixed to be non-latched
C0 ~ C95
C
(Counter)
It is fixed to be
non-latched
Initial
S0 ~ S9
S
(Step relay)
General purpose
D0 ~ D199
D
(Register)
It is fixed to be non-latched
File Register
DVP-PLC Application Manual
M512 ~ M999
Default: latched
Start: D1200 (K512)
End: D1201 (K999)
100 ms
T200 ~ T239
16-bit counting up
C96 ~ C199
Default: latched
Start: D1208 (K96)
End: D1209 (K199)
Zero return General purpose
S10 ~ S19 S20 ~ S511
It is fixed to be non-latched
D200 ~ D999
Default: latched
Start: D1216 (K200)
End: D1217 (K999)
2 Functions of Devices in DVP-PLC
N0 ~ N7, 8 points
P0 ~ P255, 256 points
I001, I101, I201, I301, I401, I501, total 6 points
I6□□, I7□□, 2 points (□□ = 1 ~ 99, time
base = 1ms)
I010, I020, I030, I040, I050, I060, total 6 points
K-32,768 ~ K32,767 (16-bit operation)
K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)
H0000 ~ HFFFF (16-bit operation)
H00000000 ~ HFFFFFFFF (32-bit operation)
Latched Special auxiliary relay
M1000 ~ M1999
Some are latched and
cannot be modified
10 ms 10 ms
T240 ~ T245
32-bit counting up/down
C200 ~ C215 C216 ~ C234
Default: latched
It is fixed to be
non-latched
Start: D1210 (K216)
End: D1211 (K234)
Latched
S512 ~ S895
Default: latched
Start: D1214 (K512)
End: D1215 (K895)
Latched Special register
D1000 ~ D1999
Some are latched and
cannot be modified.
K0 ~ K1599
It is fixed to be latched.
Control point for main
control loop
Position index for CJ
and CALL
Position index for
interruption subroutine.
Latched
M2000 ~ M4095
Default: latched
Start: D1202 (K2,000)
End: D1203 (K4,095)
1 ms 100 ms
T246 ~ T249 T250 ~ T255
Accumulative type
It is fixed to be latched
32-bit high-speed counting
up/down
C235 ~ C255
Default: latched
Start: D1212 (K235)
End: D1213 (K255)
Alarm step
S896 ~ S1023
It is fixed to be latched
Latched
D2000 ~ D4999
Default: latched
Start: D1218 (K2,000)
End: D1219 (K4,999)
2-3