CHAPTER 5 OPERATION
5-32
F.
Use the U key to change the set value.
G.
Press the M key to go to the next parameter.
• The change is saved and the next parameter
"lim-p" will appear on the main indicator.
(When "OFF" is selected, "lim-p" will not
appear.)
H.
Press the S key to display the set value of the
parameter on the main indicator.
• The current set value of zero-limit will appear on
the main indicator.
I.
Press the S key again.
• The set value will starts blinking, indicating the
product is in the change state.
J.
Use the S and U keys to change the set value.
K.
Press the M key to go to the next parameter.
• The change is saved.
L.
Press the L key and hold it down for at least
one second to return to the initial setting level.
M.
Press the L key and hold it down for at least
one second to return to the operation level.