Rear view safety RVS-83112 Product Manual

r I
REAR VIEW
L_JSAFETY
REVERSE WITH CONFIDENCE'"
Product Manual
Digital Wireless Hitch Camera
Rear View Camera System
RVS-83112
Introduction
Please read all of the installation instructions carefully
before installing the product. Improper installation
will void manufacturer's warranty
Congratulations on purchasing a Rear View Backup
Camera System. With this manual you will be able to
properly install and operate the unit.The Backup
Camera System is intended to be installed as a
supplement aid to your standard rear view mirror that
already exists in your vehicle. The Backup Camera
System should not be used as a substitute for the
standard rear view mirror or for any other mirror that
exists in your vehicle. In some jurisdictions, it is unlawful
for a person to drive a motor vehicle equipped with a
TV viewer or screen located forward of the back of the
driver's seat or in any location that is visible, directly or
indirectly, to the driver while operating the vehicle
Contents:
Camera and Monitor
Battery Not Included
Installation
STEP 1 : 9V
Load battery to battery compartment with its
polarities matched.
STEP 2:
Place camera above hitch ball and push power button for
2
seconds on camera until you see a steady blue light (to power off
camera hold power button down for
STEP 3:
Attach monitor to cigarette lighter port in vehicle. To power
on/off monitor hold power button down to
System Comes Paired
Pairing:
1 )Turn on camera (see step 2 above)
2)Hold power button on camera for
1 O
(camera is now in pair mode for
3)Turn on monitor (see step 3 above)
4)Push the pair button on monitor until PAIR
5)Restart monitor (step 3) System is now PAIRED
*Remove screws to add battery
2
seconds)
3
seconds.
�
- - - On/Off Button
6
seconds until Led flashes Blue.
seconds)
OK
is displayed