GarrettCom Magnum 4K24F Installation And User Manual page 8

Magnum 4K24 Switches Installation and User Guide
Manual switch-selections and jumpers
Fiber default: Full-duplex (Manual DIP switch settings inside of the chassis
can select each of fiber ports to HDX mode. DIP switch SW4 controls fiber
port # 2, whereas DIP switch SW6 controls fiber port #4. Down position will
sets half-duplex, up position (default) sets full-duplex).
Copper default: Auto-negotiation
LEDs: Per Port
LK/Act: Steady ON for Link with no traffic, blinking indicates port
is transmitting and receiving
FDX/Col: ON = Full-Duplex Mode
100/10: ON = 100Mbps speed
Operating Environment
Ambient Temperature: 25° to 140° F (-5° to 60°C)
Storage Temperature: -40°to 185°F (-40°to 85°C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft. (-60 to 4000m)
Packaging
Enclosure: Rugged High strength metal. Suitable for stand-alone or
rack-mounting
Dimensions: 1.75 in H x 17.0 in W x 9.0 in D
Weight:
Cooling method: Fan cooled, @ 7 cfm
Power Supply (Internal)
AC Power Connector: IEC-type, male recessed at rear of chassis,
with adjacent manual ON-OFF switch (on AC models only)
Input Voltage:
Input Frequency: 47 to 63 Hz (auto-ranging)
Power Consumption: 20 watts typical,
Power Supply Rating: 3Amps at 5VDC
DC Power Supply (Options)
-48VDC Power Input Voltage : 36 to 72 VDC
24VDC Power Input Voltage : 20 to 36VDC
125VDC Power Input Voltage : 120 to 160VDC
Std. Terminal Block : " -, GND, + "
Power Consumption: same as for AC models, see above
For Dual Source and Redundant DC for –48VDC, 24VDC &
125VDC supply options (Optional), see Appendices
Agency Approvals
UL listed (UL1950), cUL, CE
Emissions meet FCC Part 15 Class B
Optional: ETSI and NEBS L3 Certified
Warranty
www GarrettCom com . .
BLINKING = Half-Duplex Collision
OFF = 10 Mbps
4.45cm H x 43.2cm W x 22.9cm D
7.1 lb. (3.2 Kg) rack-mount models
110 to 240 VAC (auto-ranging)
Three years, return to factory
35 watts max
2
(10/04)
Made in USA