Connecting As A Telnet Client - Extron electronics DXP 44 4K PLUS User Manual

4. At the command prompt, enter
similar to figure 49.
The line
entered the actual numeric IP address or an alias name.
Figure 49.

Connecting as a Telnet Client

The Telnet utility is available from the command prompt (you may need to install the Telnet
client on your PC first). Telnet allows you to input SIS commands to the DXP switcher from
the PC via the Ethernet link and the LAN.
Starting Telnet
Access the command prompt and start Telnet as follows:
1. On the
2. Click
OK
Figure 50.
Operating using Telnet
It is not the intention of this guide to detail all of the operations and functionality of Telnet.
However, some basic level of understanding is necessary for operating the DXP switcher via
Telnet.
ping IP address
reports the actual numeric IP address, regardless of whether you
Pinging ...
Ping Response
menu, enter
Start telnet
. The computer returns a display similar to figure 50.
Telnet Screen
DXP HD 4K PLUS Series • Reference Information
. The computer returns a display
in the field.
Search
75