Sis Overview; Using The Command And Response Table; Verbose Mode - Extron electronics DXP 44 4K PLUS User Manual

SIS Overview

Using the Command and Response Table

The
switcher recognizes as valid, the responses that are returned to the host, a description
of the command function or the results of executing the command, and examples of
commands in ASCII.
NOTE: Upper- and lowercase text can be used interchangeably unless otherwise
Space
Figure 32.

Verbose Mode

The connection to a DXP switcher can be used to monitor for changes that occur on the
switcher, such as front panel operations and SIS commands from a TCP/IP connection
or the RS-232 serial port. To receive change notices from the switcher, you must enable
verbose mode 1 or 3 (see the
or 3, changes are reported in messages that resemble SIS command responses.
Command and Response Table
stated.
ASCII to Hex Conversion Table
ASCII to Hexadecimal Character Conversion Table
Verbose Mode
DXP HD 4K PLUS Series • SIS Configuration and Control
beginning on page 43 lists the commands that the
•
commands on page 51). In verbose mode 1
38