Table of Contents
Advertisement
Adding a Tie to a Set of Ties
To add a new tie to a configuration:
1.
Press and release the
2.
To select only video for the tie, press and release the
The Video LED lights green when video is enabled. Deselect audio by pressing the
button until the Audio LED is unlit (see figure 11).
I/O
Figure 11.
To select only audio for the tie, press and release the
The Audio LED lights red when audio is enabled. Deselect video by pressing the
button until the Video LED is unlit.
3.
Press and release the desired input button.
If only video is selected, its LED lights green to indicate that video outputs can be
•
tied to or untied from this input. Output button LEDs for any outputs already tied to
the selected input light green also (see figure 12).
Figure 12.
If only audio is selected, the LED for the selected input button lights red to
•
indicate that audio outputs (output 2 only) can be tied to or untied from this input.
4.
Press and release the button for the output to be added to the tie. The LED for the
selected output button blinks green (for video only, see figure 13) or red (for audio only)
to indicate that the selected input is being tied to this output.
In addition, the
ENTER
The Enter button LED blinks green to
indicate the need to confirm the change.
Figure 13.
5.
Press the
button.
Esc
Press the I/O button to toggle video on.
VIDEO
The Video LED lights green when video is selected.
Press the I/O button to toggle audio off.
AUDIO
The Audio LED is unlit when audio is deselected.
Selecting Video Only
Press and release an Input button.
The LED lights green to indicate that video
outputs can be tied to or untied from this input.
INPUTS
1
2
3
5
6
7
Selecting an Input with Ties (Video)
button LED blinks green.
Enter
Press and release the Output button to be
added to the tie.
The LED blinks green to indicate that the
selected video input is being tied to this output.
OUTPUTS
1
2
3
4
5
6
7
8
PRESET
ESC
I/O
Selecting an Additional Output (Video)
button to confirm the tie. All button LEDs become unlit.
Enter
I/O
I/O
The LEDs for any outputs already tied to the selected
input light green to indicate the existing video ties.
4
1
5
8
VIDEO
AUDIO
DXP HD 4K PLUS Series • Operation
button to toggle video on.
I/O
button to toggle audio on.
I/O
OUTPUTS
2
3
4
6
7
8
19
Advertisement
Table of Contents
