Extension Connectors (J5,J6) - Renesas M3A-HS25 User Manual

3

3.1.5 Extension Connectors (J5,J6)

The M3A-HS25 includes extension connectors to which the I/O pins of the SH7125 are connected.
MIL Standard connectors can be connected to J5 and J6, allowing the user to create an extension board or to
monitor the I/O, etc.
In addition, pins of SH7124 (48-pin version) is arranged in the extension connector (J5), so it is possible to be used
for a brief evaluation.
Figure 3.1.6 shows a pin assignment of the extension connector(J5,J6).
<Top view of solder side>
Rev.1.0 July 21, 2006
REJ10J0952-0100
40
39
40
39
Figure 3.1.6 Pin Assignment of Extension Connectors (J5, J6)
Operational Specifications
3.1.5 Extension Connectors (J5,J6)
J5
2
Extension connector
1
J6
Extension connector
2
1
3-7