Table of Contents
Advertisement
A. Using a PoE enabled port
The camera is PoE-compliant, allowing transmission of power and data via a single LAN
cable.
Refer to the illustrations below to connect the camera to a PoE-enabled port using a LAN
cable.
Use the DC 48V PoE adapter for the recorder which is already provided.
B. Using a Non-PoE port
If a PoE-enabled port is not used, use a power adaptor to connect the
camera to a Non-PoE port.
DC12V power adapter is recommended to each camera.
8
Advertisement
Table of Contents
