IP Assignment using IP Finder
IP Finder searches for all the available network devices on your local area network.
1. Prepare the SW installation CD.
2. Install IP finder to find your cameras available on the local network.
The IP Finder software can be found on the included CD.
Run IP Finder and install onto your PC.
3. When setup is complete, launch the IP Finder software.
4. To find your camera, click 'Search Start' button[①].
5. Your camera will appear.
6. To get access to the camera directly via internet explorer, select (check box) the desired
device and double click to go on a web viewer page [②].
7. To configure the camera IP address, click the 'IP Config' button, then the pop-up window
will appear [③].
8. Choose the type DHCP or Static IP [④].
13