Table of Contents
Advertisement
Video Analytic
Tamper
Tamper:
Camera Tampering can generate an alarm whenever the camera is repositioned
or severely defocused. To send an alarm, for example an email, an event map must be set
up.
Dwell time:
The default setting is 3 seconds.
NOTE
The Dwell time that must elapse before an alarm is generated. This can help prevent false
alarms for known conditions that affect the image.
To configure the camera to send an alarm when tampering occurs:
1. Go to Event Map > Add.
2. Select Event In Type.
3. Set Event Out for notification of an image changing if the lens is repositioned or
rendered severely out of focus.
47
Advertisement
Table of Contents
