Network; Tcp - XENO XIPDC1080-4e User Manual

Full hd network camera
Table of Contents

Advertisement

Network

TCP/IP
IP Address:
The DHCP (Dynamic Host Configuration Protocol) server has a feature that
automatically assigns an IP address to the device if there is a device on the network.
Obtain IP address via DHCP server:
Select the choice box if you want to assign the
IP address from DHCP server automatically, and then the remaining setting are read-only
text.
Use the following IP address:
Select the choice box if you want to assign the IP
address manually.
IP address:
The address of the camera connected to the network. Specify a unique IP
address for this network camera.
Subnet mask:
The address that determines the IP network that the camera is connected
to (relative to its address). Specify the mask for the subnet the network camera is located
on.
Gateway:
The router that accesses other networks. Specify the IP address of the
Gateway(default router) used for connecting devices attached to different networks and
network segments.
54

Advertisement

Table of Contents
loading

Table of Contents