Table of Contents
Advertisement
UPnP
UPnP is enabled by default, and the network camera then is automatically detected by
operating systems and clients that support this protocol.
UPnP:
Click the Enable UPnP checkbox to disable the UPnP. The default setting is
enabling.
Friendly name: Click in the Friendly name box and type a description for the text you are
creating (1 to 32 alphanumeric characters). If your computer is also enabled, the camera is
automatically detected and a new icon is added to "Model Name-MAC address".
NOTE
UPnP must also be enabled on your Windows computer. To do this, open the Control Panel
from the Start Menu and select Add/Rename programs. Select Add/Remove Windows
Components and open the Networking Services section. Click Details and then select UPnP
as the service to add.
59
Advertisement
Table of Contents
