Download Print this page

XENO NITRO XVDHDA28V12Q-1080 Quick Start Manual

Advertisement

Quick Links

XVDHDA28V12Q-1080
DESCRIPTION
The Xeno XVDHDA28V12Q-1080 vandal resitant dome offers full HD resolution,
and can transmit its image use in AHD / TVI /CVI and CVBS formats over 300m
of RG59 coax, with no delay or loss of image quality. The dome is rated to IP66,
and the IR LEDs ensure crystal clear images 24 hours per day.
Thank you for your purchasing this product. Before attempting to connect or
operate this product, please read these instructions carefully and save this manual
for future use.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
1.
Use the Appropriate Power Supply
The input power for the camera
power. Wrong connection may cause malfunction and/or damage to the video camera.
2.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
4
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove.
Use a mild detergent and wipe gently.
5.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.Use a
piece of lens tissue or cotton tipped applicator and ethanol.
6.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightobjects that
causes mear to appear irrespective of whether the camera is operating or not.
This can damage the sensor.
7.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise
on monitor screen may happen.
★ 2.0Megapixel high performance CMOS sensor with 25/30fps@1080P.
★ Built in IR-CUT, ensure the camera work properly both day and night.
IP66 waterproof standard.
Long-life IR LED design, whose brightness is
several times higher and service life longer than
ordinary LED's
★ SMART-IR, 20 meters IR range.
★ Image transmission up to 300 meters.
Direction
UP
Video
CVBS
Video mode switch operation and attention:
When camera is powered and connect to default DVR, keep
press OSD cable for 3 seconds to switch video.
ATTENTION
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
SHOCK, DO NOT REMOVE COVER
(OR BACK).
is DC12V.
Be sure to connect it to the appropriate
FEATURES
DOWN
LEFT
CVI
AHD
Model
Sensor
Effective Pixels
Video Frame Rate
Max.transmission distance
Video format
Mini-illumination
S/N Ration
OSD
AGC
White Balance
Backlight
NR
Shutter Speed
Day/Night
Sync code
Voltage
Current
DAY/NIGHT
Lens
IR range
Waterproof standard
Video output
Storage temperature
Operate Temperature
Size
Weight
RIGHT
TVI
*Specifications subject to change without notice.
DIMENSION(MM)
101
139.9
46
84
137.7
SPECIFICATION
XVDHDA28V12Q-1080
1080P Sensor
1920(H)x1080(V)
25/30fps@1080P
300M
PAL/NTSC
0Lux (IR ON)
More than 50dB(with AGC OFF)
Support
ON/OFF
ATW/ AWB
Low/ Middle / High
2DNR(8(1-10))
1(1-10)
SMART(COLOR,B/W)
Internal
DC12V
400mA±15%(IR ON);105mA±15%(IR OFF)
Support ICR
2.8-12mm HD Lens
20m
IP66
CVBS/AHD/TVI/CVI
-20℃~70℃
-10 ~50 RH90% MAX
101mm(H)*139.9mm(Φ)
1075g
EN-M02-572C-20150820

Advertisement

loading

Summary of Contents for XENO NITRO XVDHDA28V12Q-1080

  • Page 1 Max.transmission distance 300M DESCRIPTION Video format PAL/NTSC The Xeno XVDHDA28V12Q-1080 vandal resitant dome offers full HD resolution, 0Lux (IR ON) Mini-illumination and can transmit its image use in AHD / TVI /CVI and CVBS formats over 300m S/N Ration More than 50dB(with AGC OFF) of RG59 coax, with no delay or loss of image quality.
  • Page 2 O S D M E N U Set Up Press the menu button into the main menu “Set Up”, can set the following parameters. SET UP DAY-NIGHT VIDEO SETTING RESET SAVE-EXIT EXIT 1. Exposure Move the cursor to “AE”, and press the menu button into the submenu “Exposure”...