Table of Contents
Advertisement
Maintenance
Maintenance:
Restart:
The camera is restarted without changing any of the setting. Use this method if
the unit is not behaving as expected.
Reset:
The unit is restarted and most current settings are reset to factory default values,
but the following settings does not reset.
• The boot protocol (DHCP or static)
• The static IP address
• The default router
• The subnet mask
• The system time
Default:
The Default button should be used with caution. Pressing this returns the
camera's settings to the factory default values including the IP address.
Upgrade:
Provides the latest firmware into this camera. When you upgrade the firmware
with a file, your camera receives the latest available functionality and unparalleled reliability.
Upgrades the new firmware as following steps;
1. Click Browse button.
2. Browse to the desired firmware file on your computer.
3. Click Upgrade button.
Provides software reset of the camera when troubleshooting.
61
Advertisement
Table of Contents
