Download Print this page

XENO XBC28V12DN1M3IR Installation And User Manual

1.3mp analogue bullet camera

Advertisement

Quick Links

Norbain SD Ltd
210 Wharfedale Road
IQ Winnersh
Wokingham
UK
RG41 5TS
0118 912 5000
The crossed-out wheeled bin mark
symbolizes that within the European Union
the product must be collected separately at
the product end-of-life. This applies to your
product and any peripherals marked with
this symbol. Do not dispose of these
products as unsorted municipal waste.
This apparatus is manufactured to comply
with the radio interference. A Declaration
of Conformity in accordance with the
following EU standards has been made.
The manufacturer declares that the
product supplied with this document is
compliant the provisions of the EMC
Directive 2004/108/ EC, the CE Marking
Directive 93/68 EEC and all associated
amendments.CE RoHS2 2011/65/EU
XBC28V12DN1M3IR
1.3MP Analogue bullet camera
Installation and user guide
Please read this document before installing or
powering the camera
Do not attempt to disassemble the camera; it
does not contain any serviceable parts

Advertisement

loading
Need help?

Need help?

Do you have a question about the XBC28V12DN1M3IR and is the answer not in the manual?

Questions and answers

Summary of Contents for XENO XBC28V12DN1M3IR

  • Page 1 This applies to your product and any peripherals marked with this symbol. Do not dispose of these products as unsorted municipal waste. XBC28V12DN1M3IR 1.3MP Analogue bullet camera This apparatus is manufactured to comply with the radio interference. A Declaration...
  • Page 2 Installation: Specification Model XBC28V12DN1M3IR 1. Use the camera bracket as a template to mark 1/3" SONY 1.3Megapixel the fixing hole locations. Sensor CMOS Sensor 2. Drill a 22mm hole in wall to allow cable and OSD Effective Pixels 1305(H) X1049(V) (1.3MP) joystick to pass through.