XENO XIPDC1080-4e User Manual page 21

Full hd network camera
Table of Contents

Advertisement

Frame rate:
Indicates the number of fps (frame per second) available for the video
stream configuration. The Frame rate can be adjusted in the range from 1 to 30 fps. The
default setting is 10 fps.
Gop size:
The Gop size can be adjusted in the range from 1 to 30 fps. The default setting is 10 fps.
Bitrate control:
The bit rate can be set as VBR (Variable Bit Rate) or CBR (Constant Bit
Rate).
• VBR: Automatically adjusts the bit rate according to the image complexity, using up
bandwidth for increased activity in the image, and less for lower activity in the monitored
area.
• CBR: Allows you to set a fixed target bit rate that consumes a predictable amount of
bandwidth. As the bit rate would usually need to increase for increased image activity, but in
this case the frame rate and image quality are affected negatively.
Bitrate:
Indicates the quality of the video stream (rendered in kilobits per second). The
higher value means the higher video quality and bandwidth required. The Compression can
be adjusted in the range from 100 to 12000 kbps. The default setting is 2000 kbps.
Video Stream2:
Compression:
Selects the stream profile that is to be used for transmissions. The default
setting is Main Profile.
Resolution:
Specified as the number of pixel-columns (width) by the number of pixel-rows
(height). The Resolution can be adjusted in the range from 320x180 to 1920x1080. The
default setting is a 640x360.
Frame rate:
Indicates the number of fps (frame per second) available for the video
stream configuration. The Frame rate can be adjusted in the range from 1 to 30 fps. The
default setting is 6 fps.
Gop size:
The Gop size can be adjusted in the range from 1 to 30 fps. The default setting is 6 fps.
Bitrate control:
The bit rate can be set as VBR (Variable Bit Rate) or CBR (Constant Bit
Rate).
• VBR: Automatically adjusts the bit rate according to the image complexity, using up
bandwidth for increased activity in the image, and less for lower activity in the monitored
area.
Configures the H.264 setting value for stream 2.
21

Advertisement

Table of Contents
loading

Table of Contents