Table of Contents
Advertisement
administrator.
Destination IP:
Click in the destination IP box and type IP address.
NOTES
- Multicast addresses are allocated according to these IANA policies.
231.1.128.20
- The default setting IP address is
RTP port:
The RTP port can be entered in the range 1024-65532. The default setting is
5000.
NOTE
The RTP port entered here must be even values.
TTL:
The TTL can be entered in the range 1-255. The default setting is 1.
NOTES
• TTL (Time To Live) If IP packets (i.e. data) fail to be delivered to their destination within a
reasonable length of time (which could be for various reasons), this setting tells network
routers when to discard the packet.
• The value is usually measured in 'hops', i.e. the number of network routers that can be
passed before the packet arrives at its destination or is dropped.
58
Advertisement
Table of Contents
