Table of Contents
Advertisement
Image-Basic
Appearance Control:
setting parameters and change the camera orientation. All of parameters are
recommended to be modifying for good image quality suitable for installation place.
Brightness:
Controls the brightness of detail in a scene. The brightness can be adjusted
in the range 1~18. The default setting is 10.
Contrast:
Controls the contrast of detail in a scene. The contrast can be adjusted in the
range 1~18. The default setting is 9.
Saturation:
Controls the saturation of detail in a scene. The saturation can be adjusted in
the range 1~18. The default setting is 9.
Hue:
Controls the hue of detail in a scene. The hue can be adjusted in the range 1~7. The
default setting is 4.
Sharpness:
Controls the sharpness of detail in a scene. The sharpness can be adjusted in
the range 1~8. The default setting is 3.
Enable flip image:
Enable mirror image:
The image appearance allows you to adjust the camera
Rotate the camera image 180 degrees vertically.
Reflect duplication of camera image.
23
Advertisement
Table of Contents
