Table of Contents
Advertisement
IP Filter
IP Filter Setting:
and IP Ranges. The default setting is disabling.
Enable IP filtering:
filtering function. This dialog allows you to add new allowed/denied IP addresses. These can
be added whole ranges (subnets) of IP address can be added directly.
On/Off:
Click the checkbox to active the settings (Priority, Policy, and IP ranges).
Priority:
The number means a priority if there are duplicated IP address each IP ranges.
Policy:
Determines the filtering attribute of the IP address selected.
Start IP:
Enters the start IP address to ALLOW/ DENY in the IP range selected.
End IP:
Enters the end IP address to ALLOW/ DENY in the IP range selected.
NOTES
To add a subnet of network addresses, these must be added in CIDR (Classless Inter-
Domain Routing) notation. For example: entering 192.168.1.0/24 will add all the addresses
in the range 192.168.1.1 to 192.168.1.254. Please contact with your network administrator
for more detail.
• If you are accessing the network camera via a proxy server, the IP address for the
proxy server must be added as an allowed address.
Provides the IP filtering elements such as On/Off, Priority, Policy
Click the Enable IP filtering checkbox to enable the IP address
51
Advertisement
Table of Contents
