Front Panel Annunciators; Immediate Action Keys - Keysight N3300A User Manual

1 - Quick Reference

Front Panel Annunciators

φ1
A list is initiated or running.
CV
The selected input channel is in the
constant voltage (CV) mode.
CC
The selected input channel is in the
constant current (CC) mode.
CR
The selected input channel is in the
constant resistance (CR) mode.
Unr
The selected input channel is unregulated.
Dis
The input is OFF. Press the Input on/off
key to turn the input on.
Tran
The selected input channel is enabled for
transient operation.

Immediate Action Keys

Input
On/Off
Local

Input

Input

Channel
+
Shift Trigger
Protect
+
Prot Prot
Shift Shift
Clear Clear
+
Shift Ident
Shift Ident
Meter
14
A toggle switch that turns the input of the electronic load on or off.
Activates front panel control when the unit is in remote mode
(unless a Lockout command is in effect).
Increases the input current (CC), voltage (CV), or resistance (CR) in Meter mode.
Decreases the input current (CC), voltage (CV), or resistance (CR) in Meter mode.
Selects another channel.
Causes an initiate and trigger to occur. Used with transient subsystem or list.
Displays any protection functions that are tripped.
Resets the protection circuit and allows the unit to return to its last programmed state.
Identifies the module installed in the selected channel location. (not available)
Returns the front panel to metering mode from any other mode.
Prot
Indicates that a channel protection feature is active
on any channel. Press the Prot Clear key to clear
the protection condition.
Cal
Calibration mode is ON. Calibration can only be
done through the computer interface.
Shift
Indicates that the shift key has been pressed.
Rmt
Indicates that the electronic load is in remote state
(either GPIB or RS-232). In the remote state, only
the active key is the Local key.
Addr
The electronic load is addressed to talk or listen.
Err
A remote programming error(s) have occurred.
SQR
The electronic load is requesting a service.