General Information; Document Orientation - Keysight N3300A User Manual

General Information

Document Orientation

This manual describes the operation of the Keysight Model N3300A, N3301A, N3302A, N3303A N3304A,
N3305A, N3306A and N3307A DC Electronic Loads. Unless otherwise noted, all units will be referred to by
the description "electronic load" throughout this manual. The following documents and software are shipped
with your electronic load:
♦ A User's Guide (this document), contains installation, checkout and front panel information.
♦ A Programming Guide, contains detailed GPIB programming information.
The following Getting Started Map will help you find the information you need to complete the specific task
that you want to accomplish. Refer to the table of contents or index of each guide for a complete list of the
information contained within.
Task
Installing the unit
Line voltage connections
Installing modules
Load connections
Checking out the unit
Verifying proper operation
Using the front panel
Calibrating the unit
Using the front panel
Front panel keys
Front panel examples
Using the programming interface
GPIB interface
RS-232 interface
Programming the unit using SCPI commands
SCPI commands
SCPI programming examples
Programming the unit using VXIplug&play
instrument driver
Installing the instrument driver
Instrument driver functions
C/C++ example programs
Visual BASIC example programs
Lab VIEW example programs
Keysight VEE example programs
Getting Started Map
Where to find information
User's Guide
User's Guide
User's Guide
User's Guide
Programming Guide
Programming Guide
VXIplug&play on-line help
NOTE:
The driver must be installed on your computer to
access the on-line information.
Drivers for Keysight instruments are available on the
web at www.keysight.com/find/drivers
2
19