Digital Addressable Lighting Interface (Dali); Figure 2 Colour Led Card; Figure 3 9 Channels From Bccu Module To Control The Three Rgb Led Modules; Table 1 Bccu Signal Connection To The Samtec 2X30Pins Connector - Infineon Technologies XMC1000 User Manual

Board, colour led card, inlight rgb v3, colour led card

Hide thumbs Also See for XMC1000:

Table of Contents

Figure 3

9 channels from BCCU module to control the three RGB LED modules

Table 1 shows the connection of the BCCU signals to the SAMTEC 2x30pins connector.

Table 1

BCCU signal connection to the SAMTEC 2x30pins Connector

Pin No.

2.2

Digital Addressable Lighting Interface (DALI)

The Colour LED Card supports DALI interface on board with two optocoupler (SFH6186-2) which provide level

shifting and voltage isolation between the DALI network and the microcontroller's power supply. The DALI

connector X3 consists of a DATA+ and DATA- signal pair.

Note: Please remove R105 of XMC1200 CPU Card when using DALI for receiving data.

Board User's Manual

Signal Name

B_LED1

R_LED1

R_LED2

G_LED2

B_LED2

R_LED3

G_LED3

B_LED3

G_LED1

inLight_RGB_V3

Colour LED Card

Description

Blue channel of LED1

Red channel of LED1

Red channel of LED2

Green channel of LED2

Blue channel of LED2

Red channel of LED3

Green channel of LED3

Blue channel of LED3

Green channel of LED1

Revision 1.0, 2013-03-08

Table of Contents