Removing The Ignition Cover; Removing The Electric Starter Double Gear And The Starter Drive - SHERCO 250 SE-R 2017 Workshop Manual

DISASSEMBLY OF THE ENGINE
❱❘ Removing the ignition cover
- Remove the retaining screws, and then remove
the ignition cover along with the gasket.
❱❘ Removing the electric starter double
gear and the starter drive
- Remove the three shoulder bolts [1].
- Remove the double gear retaining bracket [2].
- Remove the double gear [3] and the needle
bearing.
- Remove the starter drive [4].
20
250-300 SE-R
2
1
3
4