Removing The Cylinder Head, Cylinder And Piston - SHERCO 250 SE-R 2017 Workshop Manual

DISASSEMBLY OF THE ENGINE
❱❘ Removing the cylinder head,
cylinder and piston
- Remove the cylinder head mounting bolts [1]
the cylinder head and the two o-rings.
- Remove the four socket head bolts [3] and the
four washers [2] located on the base of the
cylinder.
- Remove the cylinder.
- Remove the piston pin retaining clips.
- Remove the piston pin.
- Remove the piston and the needle bearing
from the connecting rod.
- Remove the base gasket.
16
3
2
250-300 SE-R
1